Translate  
  BALAJI ENGINEERING WORKS

Call Us
+ 91 022 - 26741127    Email: info@balaji-engg.com

BUTTERFLY VALVES MANUFACTURERS

BUTTERFLY VALVE

Butterfly Valves are best solution for controlling flow of liquid and gas in pipe lines..

Manufacturers of Butterfly Valves, Suppliers of Butterfly Valves, Exporters of Butterfly Valves, Sanitary Butterfly Valves, Butterfly Valves Manufacturers, Butterfly Valves, Butterfly Valves Suppliers, Butterfly Valves Exporters, Butterfly Valve by BALAJI Engineering from Mumbai, India.

Industrial ValveBalaji Butterfly Valves
are designed and manufactured to have Superior structural stability. A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position. A butterfly valve is from a family of valves called quarter-turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow. There are different kinds of butterfly valves, each adapted for different pressures and different usage. The resilient butterfly valve, which uses the flexibility of rubber, has the lowest pressure rating. The high performance butterfly valve, used in slightly higher-pressure systems, features a slight offset in the way the disc is positioned, which increases the valve's sealing ability and decreases its tendency to wear. The valve best suited for high-pressure systems is the triple offset butterfly valve, which makes use of a metal seat,[clarification needed] and is therefore able to withstand a greater amount of pressure.

  • Sanitary Butterfly Valves features:-
No water hammer effect
Compact in design with high strength
Same valve can be installed horizontally or vertically
Very light weight compared to conventional check valves
Zero maintenance for years
Low pressure drop
Superior quality butterfly valves
In-house design and manufacturing

our SERVICES